Freeze dryers

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.

Parker Hiross StarlettePlus-E series refrigeration dryers (SPE) are excellent solutions for the efficient removal of water vapor from compressed air. StarlettePlus-E combines quality with efficiency in a reliable design with minimal impact on the environment and operating costs. Thanks to the highly efficient (E-Pack) heat exchanger design, the refrigerant circuit uses less power and fewer refrigerant charges than other comparable dryers, giving the StarlettePlus-E refrigeration dryer the lowest operating costs and the smallest environmental impact. StarlettePlus-E is also available with the additional Energy Saving feature, on SPE026 models. When equipped with this energy-saving function, SPE models save additional energy at partial load by regulating the activity of the refrigeration compressor and cooling the inflowing air with the cold reserves stored in the mass of the E-pack. Features - For industrial and general air applications requiring a pressure dew point (pdp) of not less than +3 °C. - Highly efficient all-in-one aluminum heat exchanger (E-Pack). - Dual frequency, can be used for 50 Hz or 60 Hz applications - Digital controllers with integrated functions - Suitable for wall mounting (up to model SPE018) Advantages - Lowest carbon footprint on the market - Lowest operating cost and power consumption - Additional energy-saving versions available starting with model SPE026 - Low refrigerant charges (25% lower on average than comparable series) Sizes and choice To ensure that stated performance with respect to air purity is met, a compressed air dryer must be sized appropriately for minimum operating temperature, maximum inlet temperature and maximum inlet pressure; to do this, use the correction factors listed in the Product Data Sheet. For more information or to discuss your specific requirements, please contact us at 053-435 88 96 or info@kuilnicos.nl.